imageframe display and select image outline in acad autocad

Controls whether image frames are displayed and plotted
Toolbar: Reference
Menu: Modify Object Image FrameDoes not exist in the menus.
Command entry: imageframe
Enter image frame setting [0, 1, 2] : Enter an option or press ENTER

NoteNormally, when image frames are not displayed, you cannot select images. However, the IMAGECLIP command temporarily turns image frames on.
0 Setting
Image frames are not displayed and not plotted.

1 Setting
Image frames are both displayed and plotted. This setting is the default.

2 Setting
Image frames are displayed but not plotted.

Epson 4000 printer reset maintenance tank

Resetting the maintenance tank on the Stylus Pro 4000

The maintenance reset procedure for Epson Stylus Pro 4000.
Turn off the printer
Hold down the three leftmost arrow buttons [left-arrow] [down-arrow] [up-arrow]
Turn on the printer
Release the buttons
A new menu will appear
Press the up/down arrows to get to the "Clear Counters" menu
Press RIGHT
Press the up/down arrows to get the "Maintenance Tank" menu
Clear the counter.
Turn off printer.
When you restart the printer, the maintenance tank should indicate 'Empty'
Just remember to change it (or replace the wadding it contains)
An overflowing maintenance tank makes a lot of mess

Autoacad measure

divide a line with a block at certain measurement. Like divide except will make block every inch on the line